Sunday, 14 January 2018

Made up a brake rod and fittings.

I had to get some new shoes, the old ones had been buggered about with, to get the brake arm to sit and work right. Then threaded some 6mm stainless bar, turned up the brake rod barrel and nut and bought a rod end bearing off the bay. Also welded an adjustable stop on the pedal, after modicating it to suit the bearing. Random popped round Friday so we had it outside to check the footrests and pedal were all in the right place.

1 comment:

  1. question is was random in the right place never mind the foot rests

    ReplyDelete